It is completely different to use a stand-up forklift compared to a sit-down unit. The way you move and lift cargo in addition to your movements are really different. If you do not have proper training for utilizing a stand-up unit, you could potentially cause harm to yourself or to co-workers. When operating a stand-up model, you should follow the proper safety regulations. There are a few basic operating standards which need to be met when operating a stand-up model.
To start on a stand-up unit forklift, it is important to get a good feel for the controls and the steering knob. Instead of a steering wheel, the steering is handled utilizing the knob steering plate. Take note that this knob moves very fast, therefore, you have to be accustomed to moving it carefully in order to be certain not to over steer. The horn is located on the control handle, as is the control for forwards, backwards and the fork movement. The floor pedal enables the equipment to move.
If you are set to start, turn the key to start the forklift. Be sure that your forks are not extended. When you are moving all-around the floor, the forks should be pointed a little upwards. Never drive with extended forks. If you are traveling forwards, move the control handle forward and step on the pedal in order to make the lift move forward. If you are backing up, be sure to beep your horn to warn those around you. Look behind you prior to stepping on the pedal so as to make sure the way is clear and safe. Then, while stepping on the pedal, pull the control handle towards you. Stay alert and focused and make sure that you are operating in a safe manner at all times.
When it comes to turning corners, turn your steering knob in the direction you have to go while keeping your foot on the power pedal and your hand on the control handle. When turning right, the steering knob will move in a clockwise direction while moving forward. If you are turning left, your steering knob would go in a counter-clockwise direction.
If you have only used sit down units, the stand-up versions may take some getting used to. If you take some time to figure out the equipment and with some training, you could handle loads efficiently and quickly in little time.